SCCH Mk1 Bump Steer Elimination Kit

While lowering your car is good for looks and helps the overall center of gravity it adversely effects the suspension geometry and increases the cars “Bump Steer”,causing the car to be more un-stable through corners and can be corrected with the SCCH VW MK1 Bump Steer kit with Spherical outer tie-rod.

SCCH has developed this Bump steer elimination kit that re-locates the steering rods.
Using only the finest heavy duty PTFE lined rod end’s that replace the factory tie rod. Each kit comes with New rod end’s seal it washers,spacer and safety washers.

NOTE:When calculating bump steer it is best to measure it with a bump steer gauge,for the correct spacer relocation.If this is not available SCCH will provide you with a standard spacers in the kit.(.500?)

Due to varying inner tie rod length’s required, SCCH MKI Bump Steer kits are provided at the high end of length required and can require the end user to shorten them up to 3/4 depending on the application.

Although not required these are an excellent addition to the SCCH MK1 Spherical ball joint kits or Tubular lower control arms.