SCCH MK2 / MK3 Bumpsteer Eliminator Kit

While lowering your car is good for looks and helps the overall center of gravity it adversely effects the suspension geometry and increases the cars “Bump Steer”, causing the car to be more un-stable through corners and on rough roads and curbing. This adverse handling trait can be corrected with the SCCH VW MK2 / MK3 Bump-steer kit with Spherical outer tie-rods.
SCCH has developed this Bump steer elimination kit that re-locates the outer tie-rods and replaces them with spherical rod ends which can reduce or eliminate bump-steer on cars with extended ball joints or the SCCH Spherical Drop Pin Kit.

NOTE:When calculating bump steer it is best to measure it with a bump steer gauge,for the correct spacer relocation.If this is not available SCCH will provide you with a standard spacers in the kit.(.500?)
Due to varying inner tie rod length’s required, SCCH MK2/3 Bump-steer kits are provided at the high end of length required and can require the end user to shorten them up to 3/4 depending on the application.
Although not required these are an excellent addition to the SCCH MK2 / MK3 Spherical ball joint kits